FLow Cushion(tm) Alternating Pressure Cushion for use at
home, work and while driving.

Model NDC-01

Thank you for purchasing the Flow Cushion, the scientifically designed alternating pressure device for people who must sit for long periods of time.   We sincerely hope the technologically designed flows of air will support "healthy sitting" for you and those you care for.  The system is durable and uder good care should be an aid to you for many years.  We wish you the very best in health. 

The RainFloresta Team.

CONTENTS

STEP ONE

Plug the AC or Cigarette adapter into outlet or car.  Plug the other end into the AC-Cigarette adapter.  A flashing light by the On-Off button on the Controller indicates power to Flowcushion.

STEP TWO

There is no maintenance required on the FlowCushion.  Special care must be used when cleaning the cushion to not damage the electronic parts or cause an electrical hazard by using water.  

 

1.  Remove the AC or Cigarette Adapter.  The FlowCushion must not be plugged in when you are using water.

2. With a wet towel, lightly soaked in water and simple dish or clothes cleaning solutions, wipe the top and bottom of the SEAT CUSHION FABRIC ONLY.  Do not get water into the female power inlet of the FlowCushion or onto the inflation pouch.

3.  Allow to AIR dry.  Do not put in dryer or use heating device to dry.

4.  If you accidentally get water into the AC-Cigarette adapter plug or the Inflation Pouch DO NOT PLUG IN or OPERATE. Allow to air dry for 5 days before using to make sure all water evaporates.

CAUTION AND WARNINGS